主要介紹下UCGUI的修改：

1：GUI_X_ucos.c文件夾，第80行，修改為：

/*

*********************************************************************************************************

* GUI_X_ExecIdle()

*********************************************************************************************************

*/

void GUI_X_ExecIdle (void)

{

// OS_X_Delay(1);

OSTimeDly(50);//自己修改的

}

2：GUI_X_ucos.c最后添加以下函數(shù)，從GUI_X.c文件拷貝的，工程中不需要添加GUI_X

//下面是從GUI_X拷貝的

/*********************************************************************

*

* Logging: OS dependent

Note:

Logging is used in higher debug levels only. The typical target

build does not use logging and does therefor not require any of

the logging routines below. For a release build without logging

the routines below may be eliminated to save some space.

(If the linker is not function aware and eliminates unreferenced

functions automatically)

*/

void GUI_X_Log (const char *s) { GUI_USE_PARA(s); }

void GUI_X_Warn (const char *s) { GUI_USE_PARA(s); }

void GUI_X_ErrorOut(const char *s) { GUI_USE_PARA(s); }

工程文件截圖如下：